AMD Radeon R9 380 OEM To Power PCs From Hewlett-Packard - Arriving in June Along With R7 A360 and A330

Update: The AMD Radeon R9 380 OEM is confirmed to feature the Tonga Pro core as per the latest details revealed after the AMD Fiscal Analyst 24-hour interval.

HP has officially confirmed the existence of AMD's Radeon R300 series family of graphics card by announcing that one of the graphics bill of fare will exist powering their desktop PC offerings. The graphics card in specific is the AMD Radeon R9 380 OEM which will be powering dorsum-to-schoolhouse PC setups and will be launching in June 2022 along with 2 mobility chips powering all-in-ane PCs and minor form factor designs with the latest generation of CPUs/APUs from AMD and Intel.

AMD Radeon R9 380 OEM Confirmed For Launch in June 2022

The AMD Radeon R9 380 OEM will be powering the latest HP Envy Tower series desktop PCs. Users will exist getting a choice of either the GeForce GTX 980 or Radeon R9 380 graphics bill of fare to be set upwardly inside their PCs which are going to characteristic loftier-finish functioning. HP is offering users a selection for NVIDIA and AMD graphics options which may betoken to some interesting speculation. Usually, an OEM will offer configurations based on similar performance which leads me to believe that the Radeon R9 380 and GeForce GTX 980 are very similar in terms of graphics operation. Information technology wouldn't be a logical option to offer a faster selection and a slower option when the cost of each configuration given as a choice is going to end upwards similar.

There are rumors that the carte may exist based on the historic period old Tahiti or Tonga core compages but both cards don't fifty-fifty come close to a GeForce GTX 980 in performance which makes the GTX 980 an obvious selection if the Radeon option is indeed based on these ii cores. The i pick which makes perfect sense would be that the Radeon R9 380 for OEM is too based on the Hawaii compages since Hawaii has the performance that tin close up on NVIDIA'south GM204 core architecture. The other reason to believe this is that we recently spotted a R9 380 graphics carte du jour from XFX which pointed a similar PCB design every bit the reference Hawaii and that may stop up as an OEM blueprint too. If the card is indeed based on the Hawaii cadre architecture, then we might be looking at 2816 stream processors, 176 texture mapping units, 64 raster operation units and a 4 GB GDDR5 VRAM that operates along a 512-chip memory charabanc. This is even so just over speculation over the specifications of the card. The official specifications of the menu will only be presented by HP in June or when the card is launched by AMD in the upcoming months.

The menu volition be one of several rebrands featured in the AMD Radeon R300 lineup which is most probable to feature Tonga, Hawaii and Bonaire graphics chip on several Radeon R7 and Radeon R9 graphics cards while at least one of these boards volition feature a side by side generation scrap based on the new GCN architecture that includes Fiji.

AMD Radeon R7 A360 and A330 Mobility Fries Spotted

The other ii 300 series chips which take been spotted, include the AMD Radeon R7 A360 and Radeon R7 A330. Both these fries are going to exist featured on mobility devices which will make utilize of the upcoming Godavari and Carrizo APUs. The fries will replace the Radeon R5 A230 and Radeon R7 A260 which will use the PCI-Limited link instead of a proper detached MXM pattern to save up costs on depression-contour setups. The A360 will end up with four GB of memory with the A330 will make use of iv GB of DDR3 retention. In that location is a huge hype congenital up for AMD's next generation cards and we can't expect to encounter the cards in action. Meanwhile, more and more than leaks for AMD's flagship Fiji GPU go on on leaking by Videocardz as the device id has been confirmed to be 7300 for Fiji graphics processor which is looking to be a bigger Tonga with HBM (High-Bandwidth Memory) design.